tc7sh02f/fu 2009-09-09 1 toshiba cmos digital integrat ed ci rcuit silicon monolithic tc7sh02f, tc7sh02fu 2-input nor gate features ? high speed operation : t pd = 3.6 ns (typ.) at v cc = 5 v, 15 pf ? low power dissipation : i cc = 2 a (max) at ta = 25 c ? balanced propagation delays : t plh P t phl ? high noise immunity : v nih = v nil =28% v cc (min) ? 5.5-v tolerant inputs ? wide operating voltage range : v cc = 2 to 5.5v marking absolute maximum ratings (ta = 25c) note: using continuously under heavy loads (e.g. the application of high temperat ure/current/voltage and the significant change in temperature, etc.) may cause this product to decre ase in the reliability significantly even if the operating conditions (i.e. operating temp erature/current/voltage, etc. ) are within the absolute maximum ratings and the operating ranges. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating conc ept and methods?) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). note1: v out < gnd, v out > v cc tc7sh02f tc7sh02fu weight ssop5-p-0.95 : 0.016 g (typ.) ssop5-p-0.65a : 0.006 g (typ.) characteristics symbol rating unit supply voltage v cc ? 0.5 to 7 v dc input voltage v in ? 0.5 to 7 v dc output voltage v out ? 0.5 to v cc + 0.5 v input diode current i ik ? 20 ma output diode current i ok 20 (note 1) ma dc output current i out 25 ma dc v cc /ground current i cc 50 ma power dissipation p d 200 mw storage temperature t stg ? 65 to 150 c lead temperature(10s) t l 260 c pin assignment (top view) 5 v cc 4 out y in a 2 gnd 3 in b 1 product name h 3
tc7sh02f/fu 2009-09-09 2 iec logic symbol truth table a b y l l h l h l h l l h h l operating ranges characteristics symbol rating unit supply voltage v cc 2 to 5.5 v input voltage v in 0 to 5.5 v output voltage v out 0 to v cc v operating temperature t opr ?40 to 85 c 0 to 100 (v cc = 3.3 v 0.3 v) input rise and fall time dt/dv 0 to 20 (v cc = 5.0 v 0.5 v) ns/v out y in a in b > 1
tc7sh02f/fu 2009-09-09 3 electrical characteristics dc characteristics ta = 25c ta = ? 40 to 85c characteristics symbol test condition v cc (v) min typ. max min. max. unit 2.0 1.5 ? ? 1.5 ? high-level input voltage v ih ? 3.0 to 5.5 v cc 0.7 ? ? v cc 0.7 ? 2.0 ? ? 0.5 ? 0.5 low-level input voltage v il ? 3.0 to 5.5 ? ? v cc 0.3 ? v cc 0.3 v 2.0 1.9 2.0 ? 1.9 ? 3.0 2.9 3.0 ? 2.9 ? i oh = ?50 a 4.5 4.4 4.5 ? 4.4 ? i oh = ?4 ma 3.0 2.58 ? ? 2.48 ? high-level output voltage v oh v in = v il i oh = ?8 ma 4.5 3.94 ? ? 3.80 ? 2.0 ? 0 0.1 ? 0.1 3.0 ? 0 0.1 ? 0.1 i ol = 50 a 4.5 ? 0 0.1 ? 0.1 i ol = 4 ma 3.0 ? ? 0.36 ? 0.44 low-level output voltage v ol v in =v ih or v il i ol = 8 ma 4.5 ? ? 0.36 ? 0.44 v input leakage current i in v in = 5.5 v or gnd 0 to 5.5 ? ? 0.1 ? 1.0 a quiescent supply current i cc v in = v cc or gnd 5.5 ? ? 2.0 ? 20 a
tc7sh02f/fu 2009-09-09 4 ac characteristics (unless otherwise specified, input: t r = t f = 3 ns) test condition ta = 25c ta = ? 40 to 85c characteristics symbol v cc (v) c l (pf) min typ. max min. max. unit 15 ? 5.6 7.9 1.0 9.5 3.3 0.3 50 ? 8.1 11.4 1.0 13.0 15 ? 3.6 5.5 1.0 6.5 propagation delay time t plh t phl 5.0 0.5 50 ? 5.1 7.5 1.0 8.5 ns input capacitance c in ? 4 10 ? 10 pf power dissipation capacitance c pd (note 2) ? 15 ? ? ? pf note 2: c pd is defined as the value of the internal equi valent capacitance which is calculated from the operating current consumption without load. average operating current can be obtained by the equation : i cc (opr) = c pd ?v cc ?f in ? i cc
tc7sh02f/fu 2009-09-09 5 package dimensions weight: 0.016 g (typ.)
tc7sh02f/fu 2009-09-09 6 package dimensions weight: 0.006 g (typ.)
tc7sh02f/fu 2009-09-09 7 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (colle ctively ?toshiba?), reserve the right to make changes to the information in this document, and related hardware, softwa re and systems (collectively ?product?) without notice. ? this document and any information herein may not be reproduc ed without prior written permission from toshiba. even with toshiba?s written permission, reproduc tion is permissible only if reproducti on is without alteration/omission. ? though toshiba works continually to improve product?s quality and reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for providing adequate designs and saf eguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. before cu stomers use the product, create designs including the product, or incorporate the product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant toshiba informat ion, including without limitation, this document, the specificatio ns, the data sheets and application notes for product and the precaut ions and conditions set forth in the ?toshiba semiconductor reliability handbook? and (b) the instructions for the application wi th which the product will be used with or for. customers a re solely responsible for all aspects of t heir own product design or applications, incl uding but not limited to (a) determining th e appropriateness of the use of this product in such design or applications; (b) evaluating and det ermining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. toshiba assumes no liability for customers? product design or applications. ? product is intended for use in general electronics applications (e.g., computer s, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific appl ications as expressly stated in thi s document. product is neither intended nor warranted for use in equi pment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of whic h may cause loss of human life, bodily injury, serious proper ty damage or serious public impact (?unintended use?). unintended use includes, without limitati on, equipment used in nuclear facilities, equipment used in the aerospace industry, medi cal equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equi pment, equipment used to control combus tions or explosions , safety devices, elevators and escalators, devices related to electric power, and equipment used in fi nance-related fields. do not use product f or unintended use unless specifically permitted in this document. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is pres ented only as guidance for product use. no re sponsibility is assumed by toshiba for any infringement of patents or any other intellectual property right s of third parties that may result from the use of product. no license to any intellectual property right is granted by this doc ument, whether express or implied, by estoppel or otherwise. ? absent a written signed agreement, except as pr ovided in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indire ct , consequential, special, or incidental damages or loss, including without limitation, lo ss of profits, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? do not use or otherwise make available product or related so ftware or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or m anufacturing of nuclear, chemical , or biological weapons or missi le technology products (mass destruction w eapons). product and related software and technology may be controlled under the japanese foreign exchange and foreign trade law and the u.s. export administration regulati ons. export and re-export of product or related software or technology are strictly prohibi ted except in compliance with all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of product. please use product in compliance with all applicable laws and regulations t hat regulate the inclusion or use of controlled substances, including without lim itation, the eu rohs directive. toshiba assumes no liability for damages or losses occurring as a result of noncompli ance with applicable laws and regulations.
|
